c ca cb cc cd ce cf cg ch ci ck cl cm cn co cp cr cs ct cu cw cy cz

Перевод: compression

[существительное]
сжатие; сдавливание; уплотнение; сгущение; компрессия ; набивка ; прокладка

Тезаурус:

1. Engines with higher compression ratios would be more suited to Super Lead Free petrol particularly the 10 5:1 compression P5 coupe engine as the high compression ratio will lead to preignition.
2. Variable compression is offered to help control the sound at any given level, and this is augmented by a selectable ten-band graphic equaliser which governs a frequency range of 30Hz to 8KHz.
3. The highest compression engines as used by Land Rover Ltd need the timing retarding 3 to run satisfactorily on normal lead free.
4. Thus the inversion maxima and minima along this central axis may be a reflection of a number of separate basement blocks responding in different ways to the stresses created by the inversion drive mechanism (a combination of compression and strike-slip movement).
5. BOSS CS-3 compression sustainer, excellent condition, boxed, 45.
6. Carboniferous sediments have been affected by low-amplitude Hercynian folding, Mesozoic rift faulting and Cretaceous inversion-related compression and fault re-activation.
7. They can be bent by hand to the desired shape and secured by compression fittings
8. Once the central part of the nebula had undergone compression and nuclear reactions, the magnetic interaction between the hot, spinning mass of the plasma (the new sun) and a cloud of electrically charged particles would play an important role.
9. Schlter/Webra motor has excellent performance, but high compression can give starting problems.
10. Because of the extra loads imposed by the diesel process of compression - ratios of 21.5:1 in the Ford diesels at ignition, more than double those of their comparable petrol engines - cylinder blocks and crankshafts have to be stronger, heavier and therefore costlier.
11. A leak from a compression joint can often be cured by tightening the nuts - use one spanner on the fitting and one on the nut.
12. Getting the solder of a new fitting to flow can be difficult if there is some water left in the pipe, and it is often easier to replace a leaking capillary fitting with a compression fitting.
13. The compression figures, whilst not particularly low, suggest that it may be camshaft wear.