p pa pb pc pd pe pf pg ph pi pk pl pm pn po pp pr ps pt pu pv pw px py

Перевод: plasterboard

[существительное]
штукатурная плита

Тезаурус:

1. Where are two methods of dry lining walls using plasterboard; one is to fix battens to the wall and nail the plasterboard to them, and the other is to fix the plasterboard directly to the wall using a plaster-like adhesive.
2. Repairing cut-out lath-and-plaster is more difficult, but is generally best done with a small piece of plasterboard.
3. The programme highlighted the importance of providing an effective "vapour barrier" (usually a skin of plastic sheeting) behind the internal plasterboard surface - if moisture from inside the home seeped into the cavity it could rot the timber frame.
4. The boards are fixed to existing walls by adhesive or dowel fasteners, and the M-Original surface may be directly plastered or have plasterboard attached.
5. British Gypsum for instance, makes Gyproc Thermal board in four thicknesses, as well as a vapour-check grade; and Gyproc Duplex plasterboard, which has a metallised polyester film backing which is water vapour-resistant.
6. The interior is covered with plasterboard which is then skimmed with plaster so that when the house is finished it is impossible to distinguish visually between this and the traditional structure where the load-bearing walls are solid brick or concrete blocks.
7. The enclosure of individual flats within the large open floor spaces was achieved with the use of metal-stud and plasterboard partitions.
8. This kit contains a blade suitable for cutting wood with nails, plasterboard and non-ferrous metals; a fast-cutting blade for wood and plastics; a blade for iron and non-ferrous metals; a rough/fast cut blade for wood; and a useful flexible blade for non-ferrous metals.
9. All round the main building were wooden huts, and Hut 6, to which I was posted, was a large one about sixty feet long, divided by plasterboard partitions into several rooms, all of which contained the simplest and most basic furniture.
10. Now, working from the uncovered side of the wall, mark the corners of the proposed windows and drill holes to mark the positions on the plasterboard sheets.
11. Using taper-edge plasterboards, nail them in place with special plasterboard nails.
12. Drylining with any plasterboard will insulate walls to some extent, but a special thermal board, with an expanded polystyrene backing, will give additional insulation.
13. The answer is to cut out a small square of plasterboard (or to cut through the laths in the same way), cut a narrow notch in the nogging to allow the cable through, and then replace the plasterboard, nailing it in place either side of the notch, and making good with filler.