p pa pb pc pd pe pf pg ph pi pk pl pm pn po pp pr ps pt pu pv pw px py

Перевод: potentiometer

[существительное]
потенциометр

Тезаурус:

1. Gain of the INA103 is present by the connection of internal resistors to provide gain of 1 or 100, but the potentiometer (right) shows how external resistors can be used to obtain other settings; gain is determined from RG = 6/ (G-1) k, G being the gain.
2. The non inverting input of the first stage amplifier is connected via a resistor to a potentiometer linked across positive and negative voltage divider chains to provide an adjustable input offset.
3. Some constructors might not like the idea of the control potentiometer VR1 being mounted on the board and so, when the unit is boxed up, inaccessible to adjustment.
4. If, however, pin 5 is returned to a positive voltage level, determined by the setting of the potentiometer VR , the point at which the timer resets is altered.
5. The time period of IC2, during which the solenoid valve will be operating, depends on the adjustment of potentiometer VR2 in conjunction with fixed resistor R8 and capacitor C5.
6. Preset potentiometer VR1, in conjunction with fixed resistor R2 connected between IC1 pins 11 and 12, provide an adjustment which will be used to trim the timing period for best accuracy at the end of construction.
7. Prepare the case by drilling holes for transformer T1 mounting for switches S1, S2 and S3, potentiometer VR2, fuseholder FS1 and terminal block, TB1.
8. If the lamp remains on for a longer time it is possible that the incorrect outer (track) connection to the rotary potentiometer VR2 has been used.
9. The potentiometer is a stable cermet multi-turn type to allow the high resolution setting required at the highest sensitivity.
10. What in effect happens is that the system stabilizes in such a way that the slider of potentiometer VR1 is maintained at a constant level.
11. To confirm his mathematical model, McMahon made high-speed films of people walking, and used a potentiometer to measure the angles of their joints during the stride.
12. If, however, continuous variation is required, this preset can be omitted from the board and three wires taken from the relevant board points up to a conventional 1k rotary potentiometer mounted on a front panel, along with any metering.
13. VR1 is a preset potentiometer, used as a level control, to adjust for loud or quiet sounds.