s sa sb sc sd se sf sg sh si sj sk sl sm sn so sp sq sr ss st su sv sw sy

Перевод: sanding

точечный условный знак для обозначения осушки

Тезаурус:

1. Old finishes can be removed with a blow-lamp, hot air stripper, by sanding or with a solvent paint and the varnish remover.
2. The BO4510 Palm Sander is the ideal tool for all those small awkward jobs involving sanding into tight corners or confined spaces, or sanding between staircase rail supports.
3. Then a light sanding between coats, and a dust, will ensure a really good finish
4. A second application of filler may be required to fill cavities which sanding reveals.
5. If you have a lot of sanding to do away from a power source, the Bosch is a well made, quiet sander that is just the job.
6. Use masking tape to seal around doors to contain the dust - even though the sanding machine has a dust bag.
7. Sanding metalwork outside is easier with a cordless model
8. THE IMPORTANCE OF SANDING DOWN
9. The dust extraction system is quite efficient; it certainly keeps a lot of the dust out of the air, but there is still quite a bit of dust on the surface of the workpiece after you finish sanding.
10. As they contain water, the first application may cause the grain to raise on some woods, and a light sanding is recommended before applying the second coat.
11. You can do this by hand with abrasive paper and a sanding block .
12. For most applications, you can use a try square to set the table at 90, but the table can be angled downwards and locked for sanding angles down to 45.
13. Some manufacturers recommend a light sanding between the second and third coats and it is important, as with all types of products mentioned, that the instructions are read carefully before use.