s sa sb sc sd se sf sg sh si sj sk sl sm sn so sp sq sr ss st su sv sw sy

Перевод: shank

[существительное]
нога ; голень ; плюсна ; средняя узкая часть; стержень ; ствол ; стебель ; черенок ; хвост ; хвостовик ; тело заклепки; трубка ; веретено; веретено якоря; остаток ; оставшаяся часть; ножка ; слепая шахта;
[глагол]
опадать

Тезаурус:

1. Or, in my case, el airshot, el thlice, el hook, el shank, el cetera.
2. This does not have such a wide gape as the March Blues but is still relatively long in the shank.
3. Incidentally, all sizes of SDS drill bits have the same size of drill shank to fit the standard tool holder.
4. Skew or corner chisels have the edge angled out of square to the shank.
5. Carving chisels are similar to ordinary carpentry chisels, in that the edge of the blade is flat and square across the shank.
6. The boilie is then rotated round the bend so it comes to rest half way along the shank.
7. The SDS drill bits have four slots in the shank which are quickly slotted into place in the tool holder.
8. The 44 has a 1/4in shank, and I found it perfect for the aggressive work I was attempting.
9. Blade identification is etched in the shank near each tip, and seemed pretty permanent.
10. Fishtail carving tools, chisels, skew chisels, and gouges, taper from the cutting edge down to a thin shank.
11. The last two digits of a maker's reference number describe the shape of the shank and the cross section, the width is always given separately.
12. Gouges vary in the amount of curve or sweep on the cutting edge and the form of the shank of the tool.
13. Gouges and chisels can be straight, curved, bent or back bent along the length of the tool shank.