m ma mb mc md me mf mg mh mi mk ml mm mn mo mp mr ms mt mu mv mw mx my mz

Перевод: machining

механическая обработка

Тезаурус:

1. Using nothing more than precision machining methods, and without any change to dimensions or specifications, small machine tool maker Leland and Faulconer increased engine output by 23 per cent.
2. Appeldorn said the method could even be used to help make silicon chips, adding that the world leaders in diamond machining are in Britain, at Cranfield Precision Engineering.
3. "Machining cylinder heads.
4. For example, tungsten carbide tools, used extensively for machining steel, are themselves shaped by diamond tool-pieces.
5. Like his other courses this one-year programme will comprise a mix of practical and business studies, though the practical side is more likely to look at machining, timber technology and forestry.
6. The brass work was cast in the brass foundry, and from there it was sent to the brass finishing shop for machining and cleaning up, afterwards traversing the plating department where it received either venetian bronze, oxidised silver or plain brass lacquer finish, next passing to position No 3 for fixing in the carriage.
7. Any engine machining company should be able to bore out your head and press in the valve seat inserts (ETC 6278) and recut them.
8. Investment in design and manufacturing technology was 11m in 1991 and new machining centres have increased productivity by more than half in some areas of the Glasgow operation.
9. The complete unit or coupling was manufactured within the works from design to smithing, machining, assembly to the fitting on the vehicles.
10. The layout for the machining of 25-pdr shells covered an area of 35,350 sq ft.
11. He helped by doing much of the specialist machining work and designing many of the one-off items needed to marry up the different parts.
12. Plans for the forging and machining of shells at Wolverton Works were considered and discussed in early 1939.
13. A higher proportion of female labour, almost 80% of a total of 140, was possible on the machining than on the forging, and a high percentage of the female staff were part-time workers.