r
ra
rb
rc
rd
re
rf
rg
rh
ri
rj
rk
rl
rm
rn
ro
rp
rr
rs
rt
ru
rv
rw
ry
rz
Перевод: rectifier
[существительное] выпрямитель [эл.] ; детектор [радио] ; ректификатор ; очиститель [хим.]
Тезаурус:
- Likewise double check the bridge rectifier connections and the smoothing captivator C1 for polarity, as there is no standard arrangement.
- Power for the circuit is obtained from a conventional arrangement of mains transformer, T1, on-board rectifier diodes, D2 and D3 and smoothing capacitor, C6.
- The average rectifier current is given by and this works out, taking the highest voltage output as 15V at 3A, at .
- A source of d.c. voltage is obtained from a bridge rectifier and initially smoothed by a capacitor C1 in the conventional manner.
- As is pointed in International Rectifier's note AN-969m power mosfets possess advantages over bipolar transistors for ignition circuits, chiefly because of the high voltages then must withstand when used in place of a conventional mechanical contact breaker.
- But one day someone will invent the perfect rectifier, and then.
- The mains transformer T1 has dual 6V a.c. secondaries which are connected in series to provide 12V a.c. to the bridge rectifier REC1.
- The bridge rectifier should be one rated at 6A and may be difficult to find in a d.i.l. configuration.
- The input to the board from the bridge rectifier, Rec. 1, needs to be 28V to 30V d.c. if the output range of 5V to 15V is to be achieved.
- This means that the a.c. input to the rectifier bridge should be in the range of 20V to 22V r.m.s.
- Construction of this project is relatively easy as all the parts, excepting the mains transformer and bridge rectifier, are assembled on a single printed circuit board.
- International Rectifier, Hurst Green, Oxted, Surrey RH8 9BB.
- Note the bridge driver for the exciter coil allied to the synchronous rectifier downstream of the pickup coil
|